Skip to content

Description & Dates

ACI Certification Sessions

It’s About Time…

ACI Certification Sessions to fit Your Schedule

Your schedule is complicated enough without trying to schedule sessions to keep you up-to-date on certifications. Our focus is on you and providing you with the flexibility for sessions that fit your schedule, not ours. We have the experience, personnel, and facilities to deliver custom, on-line, or conventional sessions. Find a session on our calendar that works for you, or call us to schedule one that suits you or your company.

  • Exam times available by appointment year-round

    • We need a minimum of three weeks notice to order materials
  • On-line and on-demand exam prep resources available 24/7
  • Conventional, in-person sessions in nearly every month of the year
Speaker1

An Adhesive Anchor Installer is an individual who has demonstrated the ability to read, comprehend, and execute instructions to properly install adhesive anchors in concrete. The Adhesive Anchor Installer must also demonstrate possession of the knowledge to properly assess ambient conditions, concrete condition, materials, equipment, and tools for installing adhesive anchors and determine when it is appropriate to proceed with installation of an adhesive anchor or when additional guidance from a supervisor/foreman/project engineer is needed.  Read more...

A Post-Installed Concrete Anchor Installation Inspector is an individual who has demonstrated the knowledge required to properly inspect the installation of adhesive anchors in concrete. The Inspector must understand the responsibilities and qualification requirements of the Installer, inspection requirements as cited in the documents governing the construction of the project, and the process governing the qualification of anchor systems.  Read more...

Registration not yet open for the following dates; please check back.

October 18-19
December 5-6

An Aggregate Testing Technician—Level 1 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates.  Read more...

An Aggregate Testing Technician—Level 2 is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of advanced laboratory procedures for aggregates. Read more...

Registration for the following dates has not yet opened; please check back.

Dec 12-13, 2022 Level 2

A Concrete Construction Special Inspector is a person qualified to inspect and record the results of concrete construction inspection based on codes and job specifications. The program covers inspection during preplacement, placement, and post-placement operations.  Read more...

Please contact the ARM office to schedule this exam.

A Concrete Transportation Construction Inspector is a person who has demonstrated proficiency in concrete inspection methods for transportation projects, including preplacement, placement, and post-placement operations.  Read more... 

Please contact the ARM office to schedule this exam.

A Concrete Field Testing Technician—Grade I is an individual who has demonstrated the knowledge and ability to properly perform and record the results of seven basic field tests on freshly mixed concrete.  Read more...    

July 12 - exam only in Bloomington

Registration not yet open for the following sessions; please check back.

December TBD

A Decorative Concrete Flatwork Finisher is a craftsman who has demonstrated knowledge about and the ability to place, finish, cure, and protect decorative concrete flatwork.

A Decorative Concrete Flatwork Associate is a person who is knowledgeable about proper procedures to place, finish, cure, and protect decorative concrete flatwork, but who lacks sufficient work experience to qualify as a Decorative Concrete Flatwork Finisher.

Please contact the ARM office to schedule this class.

A Concrete Flatwork Finisher is a craftsman who has demonstrated knowledge about and the ability to place, consolidate, finish, edge, joint, cure and protect concrete flatwork.

A Concrete Flatwork Technician is a person who is knowledgeable about proper procedures to place, consolidate, finish, edge, joint, cure and protect concrete flatwork, but who lacks sufficient work experience to qualify as a Concrete Flatwork Finisher.  Read more...

Registration not yet open for the following sessions; please check back.

July 14  (exam only)

A Concrete Strength Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of four basic laboratory procedures related to the determination of concrete compressive and flexural strength.  Read more...

A Self-Consolidating Concrete Testing Technician is an individual who has demonstrated the knowledge of and ability to properly perform five standard test methods and practices on self-consolidating concrete.  Read more...

 

A Non-Destructive Testing Specialist is a person who has demonstrated knowledge and ability to perform specified test on hardened concrete by passing the ACI certification examinations. Read more...

 

A Specialty Commercial/Industrial Concrete Flatwork Finisher is a person who has demonstrated a basic knowledge of finishing procedures for Specialty Commercial/Industrial Concrete Flatwork Finishing, including high tolerance floor construction, application of surface treatments, and silica fume concrete, and who has demonstrated skill in operating mechanized finishing equipment. Read more...

A Specialty Commercial/Industrial Concrete Flatwork Technician is a person who has demonstrated a basic knowledge of finishing procedures for Specialty Commercial/Industrial Concrete Flatwork Finishing, including high tolerance floor construction, application of surface treatments, and silica fume concrete, but who lacks sufficient work experience and verified skills needed to qualify as a Specialty Commercial/Industrial Concrete Flatwork Finisher & Technician. Read more...

June 7 (registration not yet open; please check back)

An Aggregate Base Testing Technician is an individual who has demonstrated the knowledge and ability to properly perform, record, and report the results of basic field and laboratory procedures for aggregates and soils. Read more...

Nov 16-17 (registration not yet open; please check back)

Registration for the 2021-2022 MnDOT training calendar is complete.  Please contact Lake Superior College if you have any questions about the 2022-2023 season.

MnDOT Technical Certification Sessions

Looking for MnDOT Certifications?

ARM of Minnesota delivers some MnDOT certification sessions (listed below). Registration and certification information is provided on the MnDOT Tech Cert Program site.

  • MnDOT Aggregate Production Tester
  • MnDOT Concrete Field Tester
  • MnDOT Concrete Field Inspector
  • MnDOT Concrete Field Tester/Inspector Recertification
Scroll To Top